Christmas opening times
Our 365 24/7 technical support is available for emergency technical support over the Christmas period 0330 678 0140.
Wall Hung Boilers
Floor Standing Boilers
Heat Pumps
Hot Water Cylinders
Pressure Jets
Combined Heat and Power (CHP)
Accessories
The new Gas 210 Ace
Literature Library
Gas 210 Ace
Floor Standing Boilers
It has the capacity to be installed back-to-back, which provides added flexibility in space-saving design. The optional secondary return feature makes this boiler particularly suitable with heating technologies that use low-grade heat, such as heat pumps or underfloor circuits.
Model | 80 | 120 | 160 | 200 |
|---|---|---|---|---|
| 3 sections | 4 sections | 5 sections | 6 sections | |
| Performance | ||||
| Nominal heat output central heating operation @ 80/60°C kW (min-max) | 18-87 | 22-120 | 29-166 | 39-200 |
| Nominal heat output central heating operation @ 50/30°C kW (min-max) | 20-93 | 24-129 | 33-179 | 44-217 |
| Nominal input (Hi) (min-max) | 19-89 | 23-123 | 31-170 | 41-205 |
| Efficiency | ||||
| SBEM seasonal efficiency GCV | 95.8% | 95.66% | 95.5% | 95.74% |
| Efficiency – full load 100% NCV | 97.4% | 97.5% | 97.5% | 97.6% |
| Efficiency – part load 30% NCV | 108.6% | 108.1% | 108.3% | 108.4% |
| Eco design useful efficiency @ 80/60°C (100% full load) GCV | 87.7% | 87.8% | 87.8% | 87.8% |
| Eco design useful efficiency @ 50/30°C (30% part load) GCV | 97.7% | 97.5% | 97.3% | 97.6% |
| Gas | ||||
| Standard fuel | Natural gas | Natural gas | Natural gas | Natural gas |
| Optional fuel adjustment – see installation & service manual | LPG (propane) | LPG (propane) | LPG (propane) | LPG (propane) |
| Max gas consumption NG m3/h | 9.4 | 13 | 18 | 21.7 |
| Max gas consumption LPG m3/h | 3.6 | 4.8 | 7 | 8.4 |
| Min/max gas inlet pressure NG mbar | 17-25 | 17-25 | 17-25 | 17-25 |
| Min/max gas pressure LPG mbar | 37-50 | 37-50 | 37-50 | 37-50 |
| Gas connection size BSP inches | 1¼” male thread | 1¼” male thread | 1¼” male thread | 1½” male thread |
| Flame protection | Ionisation | Ionisation | Ionisation | Ionisation |
| Ignition | Electronic | Electronic | Electronic | Electronic |
| Flue (concentric connection supplied as standard) | ||||
| Flue diameter mm I/D | 150 | 150 | 150 | 150 |
| Air inlet diameter mm I/D | 150 | 150 | 150 | 150 |
| Mass flue gas flow rate kg/h | 27-150 | 37-197 | 39-287 | 65-345 |
| Max counter pressure PA | 130 | 130 | 130 | 130 |
| Hydraulics | ||||
| Water content litres | 12 | 16 | 20 | 24 |
| Hydraulic resistance @ 11°C ΔT mbar | 549 | 449 | 566 | 599 |
| Hydraulic resistance @ 20°C ΔT mbar | 165 | 135 | 170 | 180 |
| Nominal flow rate @11°C ΔT l/s | 1.89 | 2.61 | 3.61 | 4.33 |
| Nominal flow rate @ 20°C ΔT l/s | 1.04 | 1.43 | 1.98 | 2.38 |
| Minimum flow rate I/hr | 1120 | 1486 | 2142 | 2585 |
| Condensate connection | 32mm OD | 32mm OD | 32mm OD | 32mm OD |
| Connection size BSP | 1¼” male thread | 1¼” male thread | 1¼” male thread | 1½” male thread* |
| Standard operating temperature °C | 20-90 | 20-90 | 20-90 | 20-90 |
| Max operating temperature °C | 90 | 90 | 90 | 90 |
| Max water temperature °C | 110 | 110 | 110 | 110 |
| Max water operating pressure bar | 6 | 6 | 6 | 6 |
| Min water operating pressure bar | 0.8 | 0.8 | 0.8 | 0.8 |
| General | ||||
| Dry weight kg | 115 | 135 | 165 | 188 |
| Dimension (WxHxD) | 1190 x 1368 x 450 | 1190 x 1368 x 450 | 1190 x 1368 x 450 | 1190 x 1368 x 450 |
| NOx (Dry, 0% 02) Mg/kWh | 56 | 49 | 44 | 52 |
| Noise levels dB(A) at 1 metre | Less than 59 | Less than 59 | Less than 59 | Less than 59 |
| Eco design sound power levels LWA indoors dB | 67 | 67 | 67 | 67 |
| Standby heat Loss | 0.21 | 0.21 | 0.21 | 0.21 |
| Electrical | ||||
| Nominal power supply | 230v x 1Ph x 50hz | 230v x 1Ph x 50hz | 230v x 1Ph x 50hz | 230v x 1Ph x 50hz |
| Start current amps | 26-103 | 28-167 | 49-196 | 48-306 |
| Modulating input V dc | 0-10 | 0-10 | 0-10 | 0-10 |
| Fuse rating amps | 6.3 | 6.3 | 6.3 | 6.3 |
| Controls voltage | 24 (max 4va) | 24 (max 4va) | 24 (max 4va) | 24 (max 4va) |
| Insulation class IP | IPX1** | IPX1** | IPX1** | IPX1** |
*with supplied 1¼” > 1½" reducer bushings
**IP20 when appliance is fitted with a B23 conventional flue
Get in touch with our experts for product enquiries or to get a quote.
